Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Roofing in Santa Fe Springs, CA | Van Nuys Roofing Co
CertainTeed roofing service in Santa Fe Springs means working on two very different kinds of roofs: the architectural shingle fields on postwar tract homes and the flat membranes on warehouses, garages, and rear additions that share the same brutal sun. We’re an independent CertainTeed service provider, not an authorized dealer, and we work on both roof types across ZIP codes 90670 and 90671. If your CertainTeed roof is failing, call (866) 321-6172 and we’ll tell you straight whether it’s a patch job or a tear-off.
Why Santa Fe Springs Residents Choose Us for CertainTeed Service
We’ve torn off and rebuilt CertainTeed systems all over southeast LA County, and the roof type changes from one block to the next here. A Landmark shingle field near Telegraph Road and a Flintlastic flat membrane on a warehouse off Pioneer Boulevard fail in different ways, and we know both. Rick Dominguez, our owner, grew up off Sepulveda Boulevard in Van Nuys and spent two decades on rooftops before starting Van Nuys Roofing Co. If it doesn’t need replacing, he’s not going to tell you it does. That’s the whole approach.
We stock CertainTeed ridge cap, starter, and matching underlayment for the systems where the manufacturer’s own parts matter. Where aftermarket flashing or vent boots hold up better in Santa Fe Springs heat, we use those instead and say so. We inspect first and recommend second, always. For more on our brand-level work, see our CertainTeed sales & service page.
Styles & brands we work with
Common CertainTeed Roofing Problems We Solve in Santa Fe Springs
- Granule loss and tab cracking on south- and west-facing Landmark slopes. Summer afternoons in Santa Fe Springs regularly push past 95°F, and the UV load bakes the shingle mat year after year. Thermal cycling does the rest. You’ll see granules in the gutters first, then hairline cracks that turn into leaks.
- Flintlastic blistering and seam failures on flat roofs. Ponding water after our rare but intense winter rains sits on low-slope membranes and works into seams that already blistered in the heat. The leak often shows up far from where the water is actually getting in, which makes tracing it without a flat-roof crew miserable.
- Brittle, curling organic-mat CertainTeed shingles on 1950s tract homes. We see original or second-layer shingle fields over tar-and-gravel base layers, with almost no attic ventilation to bleed off heat. The shingles cook from below and curl at the edges. Patching individual tabs is pointless once that starts.
- Rusted fasteners, vent boots, and valley metal failing ahead of the shingle field. On homes near the industrial corridors, water tracks under otherwise sound CertainTeed courses because the metal parts went first. The shingles look fine. The roof still leaks.
- Leaks at roof-to-wall transitions on flat rear additions and garages. Many older Santa Fe Springs homes have flat-roof additions with modified bitumen or built-up roofing. The transition where the flat meets the pitched shingle roof is where we find the trouble most often.
CertainTeed Service in Santa Fe Springs: What Local Conditions Mean for Your Equipment
The thing about Santa Fe Springs is that it’s not one roofing market. It’s a small, heavily industrial city where a big flat-roof warehouse sits two lots from a 1950s tract house, and the roofer who works here has to know both. We routinely chase a leak across a low-slope surface that could be TPO on a distribution center or decades-old built-up roofing on the house next door. Ponding after a rare hard winter rain sends water sideways under both, and the leak that shows up in a warehouse office often starts 40 feet away at a parapet seam.
What this means for CertainTeed owners specifically: if you have a Landmark shingle roof with a flat rear addition or a detached garage with a Flintlastic or built-up membrane, the failure point is usually the transition between those two systems, not either one alone. Nobody develops a city where flat and pitched roofs share a property line without creating transition stress. We check the whole roof system, not just the part that’s already leaking.
On a 1950s tract house off Pioneer Boulevard, our crew opened a Landmark roof that had gone brittle and found the original tar-and-gravel layer still beneath it with almost no attic venting. The shingles had cooked from below for decades. We stripped to the deck, added ridge and soffit ventilation, and laid a new CertainTeed Landmark field with fresh vent boots and valley metal. The warehouse two lots over was booked for a Flintlastic seam patch after the same storm pooled water against its parapet. That’s a normal week here.
CertainTeed Models & Products We Service in Santa Fe Springs
We repair and replace every CertainTeed system you’ll find in Santa Fe Springs: Landmark architectural shingles, Presidential Shake and Presidential TL, Flintlastic SA self-adhered modified bitumen, and older XT25 or Roofers’ Select organic-mat shingles on original tear-offs. For flat roof patch work, we inspect the Flintlastic field honestly. If the membrane is sound, we’ll patch and coat it. If it’s blistered all over, we’ll tell you that too.
We keep CertainTeed ridge cap, starter, and underlayment stocked for quick turnaround in the 90670 and 90671 ZIP codes. For vent boots and flashing, we carry aftermarket options that hold up better in the heat, and we’re upfront about what we’re using and why.
See the difference
Before
After
Before
After
Before
AfterCertainTeed Service Pricing in Santa Fe Springs
What you’ll pay depends on the roof we’re looking at. Flat roof patch work on a Flintlastic or built-up membrane typically runs $350 to $900, depending on the size of the field and how many seams need attention. Targeted shingle repair on a Landmark roof usually lands between $300 and $750. Full replacement with CertainTeed Landmark architectural shingles runs $7 to $12 per square foot in Santa Fe Springs, with the final number set by roof slope, deck condition, and how much insulation or ventilation we need to add.
Three things drive the cost here more than anywhere else: the age of the original deck, whether the roof has any ventilation at all, and flat-surface transitions that take extra time to detail correctly. A free estimate gets you written line-item pricing and a straight answer on repair versus replace. Call (866) 321-6172 to schedule yours.
Serving Santa Fe Springs, CA — Our Local Coverage Area
We’re based in the Santa Fe Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CertainTeed Roofing in Santa Fe Springs
Not necessarily. If the membrane is still adhered and the seams are intact, we can patch and coat the field. The key is the seams. Once water pools, it works sideways under the membrane, and a small open seam becomes a large hidden leak. We inspect first and only recommend replacement when patching won’t hold. Call (866) 321-6172 for a free inspection.
In Santa Fe Springs, the answer is almost always heat. Summer temperatures over 95°F combined with intense UV exposure bake the shingle mat, and if your attic has minimal ventilation, the shingles are heating from both sides. Organic-mat CertainTeed shingles like XT25 are especially prone to it. Once cracking starts, individual tab repair won’t stop it. We’ll tell you what’s actually left in the roof.
Yes. That dual-roof situation is the norm in Santa Fe Springs, not the exception. We routinely handle a Landmark shingle field on the main house and a Flintlastic or built-up flat roof on the garage or rear addition during the same visit. The transition between the two is where we focus attention.
Local building code allows re-covering in some cases, but we rarely recommend it on 1950s tract homes here. Many already have two layers, and the original deck often needs ventilation work that a shingle-over hides rather than fixes. A full tear-off lets us address deck condition and venting, which is the actual problem on most of these roofs.
No. We’re an independent CertainTeed service provider. We’re not authorized, sponsored, or warranty-endorsed by the manufacturer, and we say that plainly because it matters. What we offer is experience with CertainTeed systems across southeast LA County and honest recommendations that aren’t tied to a manufacturer’s program. For a wider look at our brand-range work, visit our CertainTeed sales & service page.
Service Areas Near Santa Fe Springs
In addition to Santa Fe Springs, we cover nearby communities across southeast LA County and the San Fernando Valley. Our Santa Fe Springs service area page details our full coverage. We also run CertainTeed service in West Carson and Palos Verdes Estates for homeowners in those areas. If you’re near Van Nuys, Valley Glen, Sherman Oaks, Encino, Studio City, or North Hills, call and we’ll sort out coverage.
Book Your CertainTeed Service in Santa Fe Springs Today
If your CertainTeed roof is leaking, granule-bare, or blistering, don’t wait for the next hard rain to find the weak spot. Call (866) 321-6172 and we’ll schedule a free inspection and put a written line-item estimate in your hands.
Written by Rick Dominguez, Owner at Van Nuys Roofing Co, serving Santa Fe Springs and southeast LA County.